Ozone WASP V1 4m² Wing + Shark SurfSUP + Moses Hydrofoil Surf Foil

Ozone WASP V1 Wing 4m²:
WASP V1 – Wing Assisted Surf/Snow/Skate Propulsion

• Kite Wing for the water, land or snow
• Easy to fly and handle
• Stable with efficient low end grunt
• Strong and lightweight single strut design

Comes with bag and wrist leash. Ozone Kite Pump V2 has to be purchased separately.

The WASP was a fantastic product to design and test for Ozone, it is a fresh and exciting way of being driven by the elements! The design team has been learning new skills both on and off the water to bring you a wing worthy of the Ozone pedigree.

The WASP is a Kite Wing that crosses easily from water, land or snow. It offers easy power for anything that rolls, slides, planes or glides. Use it with your Skateboard, Mountain Board, Skis, Snowboard, SUP, Windsurf or Foil board. Simple, quick and a whole load of fun!

Ozone concentrated on making the WASP easy to fly and handle. The large size Leading Edge creates stability and reduces flex, it also helps develop power at low speeds to get you moving sooner. The enlarged strut provides direct angle of attack control, as flex is minimal offering a solid and controlled feeling.

Ozone has kept the aspect ratio low to have a wing that has grunt and to keep the tips from catching the water. The wing tips have a layer of scuff protection for riding on snow or land, although it is best to keep the wing off the ground.

Multiple Power Handles on the Leading Edge and Strut have been positioned to cover many options, providing maximum control
and comfort while riding. The streamline De-Power Handle at the front of the Leading Edge completely de-powers the wing for total control when carving downwind in swell or when carrying the wing.

On the water the WASP has been developed riding SUP, Windsurf and Foil boards. The simple nature of the wing makes it suitable for riding any board that has enough volume to support your weight on the water. In strong wind conditions and with developed skills it is also possible to ride with smaller volume hydrofoil boards.

On the land or snow minimal wind is required to harness the natural energy to enjoy a different feeling of propulsion.

Ozone Wingsurf Waist Leash V1 is an optional accessory for the WASP. It is one size fits all (rider and wing) and comes recommended from our design team for all WASP users. Connecting to the riders waist keeps the leash bungee further away during manoeuvres and is less fatiguing if constantly letting go of the WASP. It offers free arm movement which can be helpful when prone paddling with the WASP at your downwind side on the water.

Wing Foil

Shark SUP Allround Surf-Pro 7’8”/30” with Foil Attachment:

Inflatable Surf-SUP with Foil Attachment Plate. Surf-Sup with hydrofoil. Hydrofoil has to be purchased separately.

In the box:

• Board with Connection plate
• Aluminium Paddle
• Shark Coiled Leash
• High-Pressure dual action SUPer hand pump
• Standard Backpack
• Waterproof phone case
• Repair kit

There's no normal fin plugs in this board. Only hydrofoil connection plate.

Moses Hydrofoil Kit 82 - 1100 Carbon Onda:
1100 cm is a big wing that will leave you stoked!

Amazing pumpability, surprisingly agile, great manoeuvrability, very forgiving on breaching, great glide efficiency and FAST!

"The great thing is because of the good pumping you can stay up flying almost indefinitely".

This surprisingly light wing will make you ride the open ocean swell with no need for a breaking wave. This foil is ideal to surf small waves and thanks to its speed and pumpability will always put you in the right spot.

The 82-1100 might be the best windwing foil out there.


Content

• 1 xM82 - Carbon Plate Mast M82
• 1 xW1100 - Carbon Front Wing 1100
• 1 xS450 - Carbon Stabilizer 450
• 1 xFS710 - Fuselage 710
• 2 xSocket Head Cap Screw M6x25 and washers
• 1 xFlat Head Screw Torx M6x16
• 1 xFlat Head Screw Torx M6x20
• 2 xFlat Head Screw Torx M6x30
• 1 xFlat Head Screw Torx M6x35
• Torx, hex tip, grease
• Instructions

BASE PLATE JOINT
90 X 165 MM

MAST HEIGHT
820 MM

FRONT WING
1100

FRONT WING SPAN
1100 MM

FRONT WING ROOT CHORD
246 MM

FRONT WING ASPECT RATIO
5,7

FRONT WING SURFACE
2100 CM2

STABILIZER
450

STABILIZER SPAN
450 MM

STABILIZER ROOT CHORD
85 MM

STABILIZER ASPECT RATIO
6,22

STABILIZER SURFACE
326 CM2

Ozone Kite Pump V2:
The high quality V2 kite pump features double-action inflation, an extended barrel, ergonomic handgrips & foot base, foam air filter and a calibrated pressure gauge; however the biggest innovations hide inside.

Internal pump friction has been virtually eliminated. High quality components and lubricant ensure effortless kite inflation time and time again.

Try one out, you‘ll be pleasantly surprised.

Includes:

• Pump cylinder
• Hose
• Boston valve fillling adaptor
• Narrower filling adaptor for water toys